Operating; Selecting An Input Signal - Hitachi CP-X9110 User Manual

Operating

Selecting an input signal

1.
Activate your signal source. Turn the signal source on, to send signal to the
projector.
2.
Press the INPUT button on the projector.
Each time you press the button, the projector switches its input port in turn.
You can also use the remote control to select an input signal.
Select from the buttons for input ports as the following.
COMPUTER IN1
LAN
NOTE
• If you have set SKIP to some ports from SOURCE SKIP in the
OPTION menu, the input from the ports cannot be selected (81).
• While ON is selected for AUTO SEARCH item in OPTION menu, the projector
will keep checking the ports in above order repeatedly till an input signal is
detected (81).
COMPUTER IN2

VIDEO
INPUT button
HDMI 1
 
HDBaseT
Buttons for
input ports
Operating
HDMI 2
DVI-D
27