Filter Log; Network Information - Hitachi CP-X9110 User Manual

Filter log

Displays the usage time of the filter and projector. You can display previous logs by
pressing the ▲ button.
NOTE • The system usage time is the total lamp time from the projector is
manufactured. It cannot be reset.

Network information

The network information is displayed on three pages. You can refer IP address,
Subnet mask and Default gateway each for wireless and wired settings. Use the
▲/▼ buttons to switch the page.
Displayed information in each page is as below;
3rd page
2nd page
1st page
NOTE • Network information is available only by switching from the display
of the Filter log with log number 0. Refer to the flow chart in "Switching the
21)
display". (

: Default gateway
(wireless and wired)
: Subnet mask
(wireless and wired)
: IP address
(wireless and wired)
I P A D D R E S S
W 1 9 2 1 6 8 0 0 2 1 9 6
N 1 9 2 1 6 8 0 0 1 0 7 5
Network information
(example)
Status Monitor
Wireless
Wired
25