Hitachi CP-X9110 User Manual page 46

Operating
PbyP (Picture by Picture) / PinP (Picture in Picture) (continued)
 Changing the picture input signal
Press any button to select an input port on the remote control or press the
INPUT button on the control panel. A dialog box to select the input signal for
the main area will be displayed. Choose a signal using the ▲/▼ buttons. To
change the signal in the sub area, switch temporarily across to the main area
with the ◄/► buttons.
Displaying the same signal on the both areas is not allowed. Refer to the table
for details on available input signal combinations. Any combinations marked
with "X" can not be selected.
main area sub area
Input signal
PbyP mode
NOTE
• The combined input signals marked with an "O" can be selected and
displayed in the PbyP / PinP mode even when the port is set to SKIP with the
SOURCE SKIP on the OPTION menu (81).
(continued on next page)
46
Sub area
Main area
COMPUTER IN1
O
COMPUTER IN2
O O
HDMI 1
O O O
HDMI 2
O O
DVI-D
O O
HDBaseT
O O O O O O
VIDEO
X
LAN
O O O O O O
O O O O O
O X X
O O O
X O X
X O X
X X X X X
main area
Input signal
PinP mode
X
X
O X
X
O X
O X
X
X
sub area