Hitachi CP-X9110 User Manual page 85

Item
SERVICE
(continued)
(continued on next page)
LENS TYPE
(1) Select the lens type currently used using the ▲/▼ buttons and
press the ► or ENTER button. If AUTO is selected, the projector
determines the lens type automatically.
(2) A message dialog is displayed for confirmation. Press the ► or
ENTER button to save the lens type.
• This setting has an influence on the keystone distortion etc.
• The lens type determined by the projector will be displayed on the
right of "AUTO".
• If the projector cannot determine the lens type automatically when
this item is set to AUTO, "UNKNOWN LENS" is displayed on the
right of "AUTO".
• About the optional lens, ask your dealer.
■ Lens for CP-X9110
USL-901, SL-902, SD-903X, ML-904, LL-905, UL-906
■ Lens for CP-WX9210, CP-WU9410
USL-901, SL-902, SD-903W, ML-904, LL-905, UL-906
* SD-903X is for CP-X9110 ONLY
* SD-903W is for CP-WX9210 and CP-WU9410 ONLY
The optical performance is decline, if a lens which is not
compatible with the projector is used.
A WARNING message will appear too, even if you select the
incompatible lens type or AUTO in this function.
A WARNING message will appear at start-up too.
LENS LOCK
Using the ▲/▼ buttons turns on/off the lens lock feature. When ON
is selected, the buttons (ZOOM, ZOOM + / -, FOCUS + / -, LENS
SHIFT, LENS MEMORY) are locked.
ON  OFF
KEY LOCK
(1) Use the ▲/▼ buttons to choose the operations control.
CONTROL PANEL  REMOTE CONTROL
(2) Use the ◄/► buttons to select ON or
OFF.
ON  OFF
Selecting ON in Step 2 locks the buttons except STANDBY, ON
and STANDBY/ON on the operations control selected in Step 1.
Selecting OFF releases the locked buttons on the operations control
selected in Step 1.
• Please use this function to prevent tampering or accidental
operation.
• It's not possible to disable both options at the same time.
Description
OPTION menu
85