The Current Status (Warnings And Errors); Error Log - Hitachi CP-X9110 User Manual

The current status (Warnings and Errors)

The Status Monitor displays a warning or an error with larger letters. When it is
displayed, refer to the table "Related messages"(
the indicator lamps" (
Warnings;
AIR (AIR FLOW): The internal temperature is rising.
Refer to the message "There is a possibility that the interior portion has
become heated" in the table "Regarding the indicator lamps" (
COLD: The inside of the projector is cooled excessively.
FILTR: It is time to clean the air filter.
SHUTR: Shutter Error
SHIFT: Lens Shift Error
LAMP1: Lamp 1 Warning
LAMP2: Lamp 2 Warning
HUMID: Humidity is too high.
C.WHL: Error of one of the two color wheels
IRIS: Active Iris Error
Refer to the table "Regarding the indicator lamps". (
Errors;
COVER: The lamp cover has not been fixed properly.
FAN: The cooling fan is not operating.
LAMP: Error of both lamps.
TEMP: The inside of the projector is overheating.
OTHER: Errors other than the above
Refer to the table "Regarding the indicator lamps". (
NOTE • The backlight blinks when an error is displayed.

Error log

Press the ▲ button to display previous error log when the current status is
displayed with the backlight on. Up to 10 error logs can be displayed. The log
contains the log number, occurred error, the supplied voltage and peripheral
temperature at that time. Press the ► button to display the usage time in the
24) and the Filter log (
Lamp log (

NOTE • If no error or less than 10 errors have occurred, "NO DATA" is
displayed in spite of occurred error in the error log.
106)

25) when each error occurred.

Troubleshooting) or "Regarding

106)

106)

Status Monitor
108)

23