Part Names - Hitachi CP-X9110 User Manual

Introduction

Part names

Projector
(1) Dust protector
(2) Remote sensors(19)
(3) Elevator feet (x2) (29)
(4) AC (AC inlet) (17)
(5) Holes for Cable Tie(14)
(6) Security slot (16)
(7) Security bar (16)
(8) Control panel (5)
(9) Status Monitor(20)
(10) Ports (5)
(11) Indicators (5)
(12) Intake vents (102)
(13) Exhaust vents(102)
(14) LAMP - 1 lamp cover (99)
(15) LAMP - 2 lamp cover (99)
(16) Battery cover
The internal clock battery is
inside (104).
WARNING
manuals direct it.
►Do not subject the projector to unstable conditions.
►Do not apply a shock or pressure to this product. Remove all the attachments
including the power cord and cables, from the projector when carrying the
projector.
►Do not look into the lens and the openings on the projector while the lamp is
on.
►Do not touch around the lamp cover and the exhaust vents during use
or just after use, since it is too hot.
CAUTION
lens, such as melting the lens.
4
►Do not open or remove any portion of the product, unless the
►Do not attach anything onto the lens, it could damage the
(9) (10) (11)
(8)
(7)
(4)
(3)
(6) (5)
(11)
(15)
(12)
(1)
(2)
(13)
(14)
(16)