Hitachi CP-X9110 User Manual page 68

SETUP menu
Item
LAMP & FILTER
(continued)
(continued on next page)
68
CYCLE TIME
Using the ▲/▼ cursor buttons changes the CYCLE TIME.
6h  12h  18h  24  1 week
Lamp switches according to the setting here.
• This function is only available if CYCLE TIME is selected at ALTERNATE
of LAMP MODE.
LAMP-1 TIME
The lamp time is the usage time of the lamp-1, counted after the last
resetting. It is shown in the LAMP & FILTER menu.
Pressing the RESET button on the remote control or the ► button
of the projector displays a dialog.
To reset the lamp time, select the OK using the ► button.
CANCEL  OK
• Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
• For the lamp replacement, see the section Replacing the lamp
99
( ).
• The lamp time can be checked also with the Status Monitor (
LAMP-2 TIME
The lamp time is the usage time of the lamp-2, counted after the last
resetting. It is shown in the LAMP & FILTER menu.
Pressing the RESET button on the remote control or the ► button
of the projector displays a dialog.
To reset the lamp time, select the OK using the ► button.
CANCEL  OK
• Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
• For the lamp replacement, see the section Replacing the lamp
99
( ).
• The lamp time can be checked also with the Status Monitor (
Description
20
)
20
)