Projector Features; Preparations; Contents Of Package; Fastening The Lens Cover - Hitachi CP-X300 User Manual

Projector features

This projector has a capability to project various picture signals onto a screen.
This projector requires only a minimal amount of space for installation and can
produce a large projected image from even a short distance.
This projector boasts a variety of I/O port, the 6W built-in speaker and low noise.
These features provide you with the broad use of this projector.

Preparations

Contents of package

Please see the "Contents of package" in the "User's Manual (concise)" which
is a book. Your projector should come with the items shown there. Contact
immediately your dealer if anything is missing.
NOTE • Keep the original packing materials, for future reshipment. Be sure
to use the original packing materials when moving the projector. Use special
caution for the lens.

Fastening the lens cover

To avoid losing the lens cover, please fasten the
lens cover to the projector using the enclosed strap.
1.
Fix the strap to the strap hole of the lens cover.
Thread one end of the strap through the strap hole
of the lens cover and make the loop at the end, and
let the other end of the strap through the loop. Not
have a knot in the strap at either end.
2.
Fix the strap to the strap hole of the projector.
Thread the other end of the strap through the strap hole of the projector and make
the loop there. Let the lens cover with the one end of strap though the loop.
Projector features / Preparations
3