Hitachi CP-X9110 User Manual page 88

OPTION menu
Item
SERVICE
(continued)
(continued on next page)
88
COMMUNICATION TYPE
Select the communication type for transmission via
the CONTROL port.
NETWORK BRIDGE: Select this type, if it is
COMMUNICATION
OFF: Select this mode to receive RS-232C
• OFF is selected as the default setting.
• When you select the NETWORK BRIDGE, check
the item, TRANSMISSION METHOD (89)
Description
NETWORK BRIDGE (WIRELESS)

NETWORK BRIDGE (WIRED)

OFF
required to control an external device as a
network terminal, via this projector from the
computer. Select WIRELESS or WIRED as your
network connection mode.
The CONTROL port doesn't accept RS-232C
commands ( Network Bridge Function in the
Network Guide)
commands using the CONTROL port.