Operating
Selecting an aspect ratio
1.
Press ASPECT button on the remote control.
Each time you press the button, the projector switches
the mode for aspect ratio in turn.
For a computer signal
CP-X9110:
NORMAL 4:3 16:9 16:10
CP-WX9210, CP-WU9410:
NORMAL 4:3 16:9 16:10 NATIVE
For an HDMI
CP-X9110:
NORMAL 4:3 16:9 16:10 14:9
CP-WX9210, CP-WU9410:
NORMAL 4:3 16:9 16:10 14:9 NATIVE
For a video signal
CP-X9110:
4:3 16:9 14:9
CP-WX9210, CP-WU9410:
4:3 16:9 16:10 14:9 NATIVE
For an input signal from the LAN, or if there is no signal
CP-X9110: 4:3 (fixed)
CP-WX9210, CP-WU9410: 16:10 (fixed)
NOTE
• ASPECT button does not work when no proper signal is inputted.
• NORMAL mode keeps the original aspect ratio setting.
28
signal
TM
ASPECT
button