Preparations; Fastening The Lens Cover - Hitachi PJTX200J User's Manual And Operating Manual

Preparations

Fastening the lens cover

Fasten the lens cover to the projector using the included strap to prevent it from
becoming lost.
1. Fix the strap to the lens
cover strap ring.
2. Put the strap into the
groove on the rivet.
3.
Press the rivet into the
strap hole.
4. Put the lens cover on
the lens of the projector.
WARNING
► Do not fasten the lens cover during or immediately after use.
Handling while the projector is hot could cause burn and/or projector malfunction.
CAUTION
► When the projector is not in use, be sure to close the lens
cover to prevent the lens surface being scratched.
(1)
Strap
Lens cover strap ring
Preparations
(2)
Strap hole
Rivet
9