Hitachi CP-X9110 User Manual page 86

OPTION menu
Item
SERVICE
(continued)
(continued on next page)
86
COLOR WHEEL LOCK
Using the ▲/▼ buttons turns off/on the COLOR WHEEL LOCK.
ON  OFF
ON : COLOR WHEEL is locked and the settings can not be changed
from PICTURE MENU.
OFF : COLOR WHEEL settings can be change from PICTURE
MENU.
REMOTE RECEIV.
(1) Select a remote sensor using the ▲/▼ button.
FRONT  REAR  HDBaseT
(2) Switch it using the ◄/► button.
ON  OFF
•Both FRONT and REAR sensor can not be turned OFF at the same
time.
REMOTE FREQ.
(1) Use the ▲/▼ button to change the projector's remote sensor
frequency setting (19).
1:NORMAL  2:HIGH
(2) Use the ◄/► button to change the
projector's remote sensor on or off.
ON  OFF
The factory default setting is for both 1:NORMAL and 2:HIGH to be
on. If the remote control does not function correctly, disable either of
them.
• It's not possible to disable both options at the same time.
REMOTE ID
Use the ▲/▼ buttons on the REMOTE ID menu to select ID and
press the ► button.
ALL  1  2  3  4
The projector is controlled by the remote control whose ID button
is set the same number as this number. When the ALL is selected,
the projector is controlled by a remote control irrespective of the ID
setting.
Description