Table of Contents
Advertisement
3. Using the Live Mode
3.7 Start the "Live Viewer 3"
When you get the connection between your projector and PC, the "Live Viewer 3"
main menu will be shown on the PC screen.
On the main menu you can configure the settings and operate the functions to
send your images to the projector in the Live Mode.
3.7.1 Main menu and Operating buttons
1) Menu Type
There are 2 type of the main menu, Easy type and Advanced type, which can
be switched on screen.
• When the "Live Viewer 3" is started, the last used type will be screen.
• When the network connection is not established, the Advanced type will be on
screen.
Easy Type
q
e
Switch to Advanced type
2) Operating buttons
q Starting Capture button
The transmission to the projector is started and the images will be displayed
in the Live Mode.
The Display mode will be the Single PC mode at first. After that, the last
Display mode will be applied.
w Stop button
The image transmission is stopped.
NOTE
• The images may not be displayed on screen, if the Start/Stop buttons
are clicked repeatedly.
54
w
Switch to
Easy type
Indicator
Fig. 3.7.1 a Live Viewer 3 Main menu
Advanced Type
a
Status Display
o
r
t
y
u
i
Advertisement
Table of Contents
