Table of Contents
Advertisement
Operating
Operating
Adjusting the volume
1.
Use the VOLUME +/VOLUME - buttons to adjust the volume.
A dialog will appear on the screen to aid you in adjusting the
volume. If you do not do anything, the dialog will automatically
disappear after a few seconds.
● When
is selected for current picture input port, the volume adjustment is
disabled. Please see AUDIO SOURCE item of AUDIO menu (46).
● Even if the projector is in the standby mode, the volume is adjustable when
both of the following conditions are true:
- An option other than
item of the AUDIO menu (46).
- NORMAL is selected in the STANDBY MODE item of the SETUP menu (45).
● In the standby mode, the volume of the microphone is adjustable with the
VOLUME +/- buttons on the remote control, in synchronization with the volume
of the projector (12).
Temporarily muting the sound
1.
Press MUTE button on the remote control.
A dialog will appear on the screen indicating that you have muted
the sound.
To restore the sound, press the MUTE, VOLUME + or
VOLUME - button. Even if you do not do anything, the dialog
will automatically disappear after a few seconds.
● When
is selected for current picture input port, the sound is always muted.
Please see AUDIO SOURCE item of AUDIO menu (46).
● C.C. (Closed Caption) is automatically activated when sound is muted and an
input signal containing C.C. is received. This function is available only when
the signal is NTSC for VIDEO or S-VIDEO, or 480i@60 for COMPUTER IN1
or COMPUTER IN2, and when AUTO is selected for DISPLAY in the C.C.
menu under the SCREEN menu (53).
Selecting an input signal
1.
Press INPUT button on the projector.
Each time you press the button, the projector
switches its input port from the current port as below.
COMPUTER IN1 COMPUTER IN2
VIDEO
S-VIDEO
HDMI
● While ON is selected for AUTO SEARCH item in OPTION menu (54), the projector
will keep checking the ports in above order repeatedly till an input signal is detected.
● It may take several seconds to project the images from the USB TYPE B port.
(continued on next page)
20
is selected for STANDBY in the AUDIO SOURCE
USB TYPE A
USB TYPE B
VOLUME +/- button
INPUT button
LAN
MY SOURCE/
VIDEO
COMPUTER
DOC.CAMERA
ASPECT
AUTO
SEARCH
BLANK
MAGNIFY
PAGE
VOLUME
FREEZE
UP
ON
＋
OFF
DOWN
ー
MY BUTTON
KEYSTONE
MUTE
1
2
FOCUS
D-ZOOM
-
+
-
+
POSITION
MENU
ENTER
ESC
RESET
MUTE button
MY SOURCE/
VIDEO
COMPUTER
DOC.CAMERA
ASPECT
AUTO
SEARCH
BLANK
MAGNIFY
PAGE
VOLUME
FREEZE
UP
ON
＋
DOWN
OFF
ー
MY BUTTON
KEYSTONE
MUTE
2
1
FOCUS
D-ZOOM
-
+
-
+
MENU
POSITION
ENTER
ESC
RESET
Advertisement
Table of Contents
