Password: Password
Once you log in as Administrator, you can create a new user and set a custom password.
To set the properties of each camera connected to the network, follow the steps below:
1. Click the "Properties" button. The software will automatically find all EN cameras currently on the net-
1.
work.
Select the EN camera you want to see in the left window. All accessible registers are displayed in the right
2.
window.
Click the "Video" button. You can select the cameras in the left window in order to display either a live
3.
image, or a triggered image. You can display up to four cameras in a single screen.
Adjust the lens as needed.
4.
TS-2030EN/TS-2076EN Series Progressive Scan Cameras
Getting Started
Page 5