Table of Contents
Advertisement
7.4.5 Time Zone– B35
Command: 0000,B35,T
SMS Get: IMEI,B35,OK
Note:
Default time of the tracker is GMT. You can use this command to change the time on your tracker to your local
time. This command is for SMS tracking only.
Time zone of SMS report is separated with that of GPRS data. If you need to set time zone in GPRS data, please
use SMS command: 0000, B36, T
T=0, to turn off this function.
T=[-32768,32767] to set time difference in minutes to GMT.
For those ahead of GMT, just input the time difference in minutes directly. For example, GMT+8,
W000000,032,480
'-'is required for those behind GMT. For example, W000000,032,-120.
Example: 0000,B35,480
SMS Get: 353358017784062,B35,OK
For more details regarding SMS commands, please refer to MEITRACK SMS Protocol.
7.5 Configure by Computer
The following shows you how to configure MVT100 with MEITRACK Manager.
Please refer to the MEITRACK Manager User Guide for more details on MEITRACK Manager.
Step 1. Install the USB driver and Meitrack Manager in advance.
Step 2. Connect MVT100 to PC with the USB cable.
Methods of confirming if USB Driver is installed: Run Device Manager (right-click "My Computer" –"Manage"
–"Computer Management"- "Device Manager " )
Click "Port(COM and LPT)", and find "Prolific USB-to-Serial Comm Port", if there is no "Prolific USB-to-Serial Comm
Port", please re-install the USB driver ( please refer to the MEITRACK Manager User Guide for detailed guidance).
Copyright © 2013 Meitrack Group All rights reserved.
File Name:
MEITRACK MVT100 User Guide
Project:
MVT100
Sub Project:
User Guide
Revision:
V5.0
Creator:
Cavana Cheung
Creation Date:
Update Date:
Page:
Confidential:
External Documentation
2010-09-09
2013-07-22
- 10 - of 16
- 10 -
Advertisement
Table of Contents
