The user manual may be changed without notice. Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for any purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying and recording.
Ensure that the phone card PIN lock has been closed. Ensure that the SIM card in the MVT380 has subscribed the caller ID service if you want to use your authorized phone number to dial the SIM card. ...
6.2 Charging When you use the MVT380 for the first time, connect the MVT380 GND (-Black) and Power (+Red) wires to 12 V or 24 V external power supply for charging. Ensure that the MVT380 is charged at least three hours. Eight hours are recommended.
MEITRACK MVT380 User Guide More SMS commands You can configure the MVT380 on a mobile phone or on a computer by using Meitrack Manager. For details, see section 6.5 "Configured on a Computer." Note: The default password is 0000. You can change the password by using Meitrack Manager and SMS commands. For details, see section 6.5 "Configured on a Computer."...
0000,A12,6,0 to the tracker SIM card number. Configured by Meitrack Manager: Connect the tracker to a PC, run Meitrack Manager to enter the main screen, and click the Tracking tab to set parameters. Visit ms02.trackingmate.com, and enter the user name and password. Contact us if you have no account or forget the password.
Page 11
Go to the map, and choose Manage > Admin. Select a user, and click Add a New Device. Obtain the tracker IMEI number from the packing or Meitrack Manager, register a device, set the parameters shown in the following figure, and then click Save.