Meitrack Group (MEITRACK), or transmitted in any form, either electronically or mechanically, including photocopying and recording. In no event shall Meitrack Group (MEITRACK) be liable for direct, indirect, special, incidental, or consequential damages (including but not limited to economic loss, personal injury, and loss of asset and property) arising out of the use or inability or illegality to use the product or documentation.
Check that the SIM Lock code is turned off; If you require the function of sending an SMS location report to the authorized phone number when it makes a call to the MVT600, please make sure the SIM installed supports displaying caller ID.
MVT600 is connected to the GSM network Flashing (1 second on and 2 seconds off) MVT600 is not connected to the GSM network 6.4 Track by Calling Make a call to MVT600 and it will report with one SMS. For example, Now,110727 02:48,V,16,23Km/h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329 &ie=UTF8&z=16&iwloc=addr&om=1 Click on the link then the location can be shown directly on Google Maps on your mobile phone.
Page 8
For more details, please refer to part 6.5 Configure by Computer. Note: Password is 4 digits only and defaulted as 0000. You can change the password by using the Meitrack Manager and SMS command. MVT 600 will only accept commands and send SMS report from a user with the correct password.
If no preset phone number, it is empty (default is empty). Send command “0000, A71” to delete all phone numbers. When the SOS button is pressed, MVT600 will make a call to phone number 1, 2 and 3. It will stop calling when one number answers.
If ‘Prolific USB-to-Serial Comm Port’ cannot be found, you need to re-install the USB driver (for detailed installation instructions, please refer to Meitrack Manager User Guide) Note: Remember this Com number. It needs to be input into the Meitrack Manager. It is COM3 in this example and it would be COM4 or COM5… in your computer.
V3.1 Confidential: External Documentation Note: Meitrack Manager is in the CD. The language will be automatically adjusted to be the same as your PC operation system’s language. Please use “Ctrl+L” to change the language. 6.5.1 GPRS Tracking Select Column2: Tracking To set GPRS parameters, Select this column to modify.
“Out Alarm”. Map: click “In Map” to make and define geo-fence. For complete software functions, please refer to Meitrack Manager User Guide. 6.5.3 Authorized Phone Number/GPRS Event Select column 4 to set authorized alarm phone number, GPRS event and other functions. For complete software functions, please refer to Meitrack Manager User Guide.
Before using this function, please first setup GPRS log time interval( to set this option under column 1 ‘Device’ in Meitrack Manager), The terminal device will automatically save the log in the storage chip when there exits GPS signal. Recorded tracking & locating data can be exported under this column. No GPRS signal, no log.
Note: Do not shield or cover the GPS antenna with any objects containing metal. 7.3 Mount the MVT600 unit If mounting required, there are 4 screw holes on the MVT600, 2 along either side that act as fixing points to the vehicle Please do not hesitate to email us at info@meitrack.com...