Time Zone- B35; Configure By Computer - MeiTrack MVT600 User Manual

6.4.5 Time Zone– B35
Command: 0000,B35,T
SMS Get: IMEI,B35,OK
Note:
Default time of the tracker is GMT. You can use this command to change the time on your tracker to your local
time. This command is for SMS tracking only.
Time zone of SMS report is separated with that of GPRS data. If you need to set time zone in GPRS data, please
use SMS command: 0000, B36, T
T=0, to turn off this function.
T=[-32768,32767] to set time difference in minutes to GMT.
For those ahead of GMT, just input the time difference in minutes directly. For example, GMT+8,
W000000,032,480
'-'is required for those behind GMT. For example, W000000,032,-120.
Example: 0000,B35,480
SMS Get: 353358017784062,B35,OK
For more details regarding SMS commands, please refer to MEITRACK SMS Protocol.

6.5 Configure by Computer

This part shows you the basics in how to use the MEITRACK Parameter Editor.
Note: Don't connect MVT600 to external battery when configuring.
Please refer to the MEITRACK Parameter Editor User Guide for more detailed information regarding configuration
and functions.
Run 'PL2303_Prolific_DriverInstaller' to install the driver for the USB data cable.
Note: PL2303_Prolific_DriverInstaller is in the folder 'USB-232 Driver' in the CD.
Connect the USB Data Cable between MVT600 and PC.
Open Device Manager (Device Manager is under Control Panel\System and Security\System). You can then find
'Prolific USB-to-Serial Comm Port' as the following picture shows.
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
File Name: MEITRACK MVT600 User Guide
Project: MVT600
Sub Project: User Guide
Revision: V2.0
Creator: Cavana Cheung
Creation Date:
Update Date:
Page:
Confidential: External Documentation
2010-09-13
2011-08-01
10 of 22