To Switch Remote Access On / Off; To Change The Remote Access Pin - Motorola O2 Manual

Notes
If you have any new messages they will be played after you have entered your
remote access PIN code.
If you enter an incorrect PIN code you will hear "Incorrect security code or two
beeps (error beeps). Please enter your security code". You can try entering the
code again. If it is still incorrect you will hear the voice prompt or two beeps
(error beeps) and the O2 will hang up.
11.15

To switch remote access on / off

1. Press Menu, the display shows
2. Scroll to
Answer Settings
D
3. Scroll or
U D
4. Scroll or
U D
n
5. Press to return to standby.
11.16

To change the remote access PIN

The default remote access PIN is 0000.
1. Press Menu, the display shows
2. Scroll to
Answer Settings
D
3. Scroll or
U D
4. Scroll or
U D
5. Enter the old 4-digit PIN and press
6. Enter the new 4-digit PIN and press Save.
7. Re-enter the new PIN and press Save.
n
8. Press to return to standby.
Notes
This PIN is different from the System PIN used when resetting the unit or when
registering / de-registering handset.
It is advisable to make a note of your new PIN code and keep it somewhere
safe.
46
Answer
and press Select.
to
Remote Access
to or then press Select.
Off On
Answer
and press Select.
to
Remote Access
to
Set Remote PIN
Machine, press Select.
and press Select.
Machine, press Select.
and press Select.
and press Select.
(default setting = 0000).
Save
Answering machine