Final Fitting; Customer Care - Falcon 900S Induction G5 User's Manual & Installation Instructions

Final Fitting

Fitting the Plinth
Remove the 3 screws for the plinth mounts along the front
bottom edge of the cooker (Fig.7-12). Fasten the plinth using
these screws (alternative colour screws can be found in the
loose parts pack).
Refitting the Drawer
To re t the drawer in the cooker, pull the side rails fully out
(Fig.7-13). Make sure the inner rail is forwards.
Carefully move the drawer back between the rails and rest it
on the side rails (Fig.7-14).
Push the drawer back until the clips click into place.
Refitting the Oven Door
To re t the door, slide the hinges back into their slots. Rotate
the locking 'U' clips back to t onto the hinges.

Customer Care

Please complete your details in this guide, inform the user
how to operate the cooker and hand over the Instructions.
Thank you.
Check the appliance is electrically safe when you have nished.
INSTALLATION
Make sure the inner
rail is forwards
25
ArtNo.350-0012 - Securing the plinth
Fig.7-12
Fig.7-13
Fig.7-14