Table of Contents
Advertisement
Fig.7-4
Fig.7-5
ArtNo.325-0002 - BI oven removing the door
Fig.7-6
Fig.7-7
ArtNo.010-0004 Moving the cooker
Check the appliance is electrically safe when you have nished.
INSTALLATION
Removing the Oven Door
To remove the door, open the door fully. Swivel the locking 'U'
clips forward to the locking position (Fig.7-4). Grip the sides
of the door, lift upwards and then slide the door forwards
(Fig.7-5) and remove.
Lowering the Two Rear Rollers
To adjust the height of the rear of the cooker, rst t a 13 mm
spanner or socket wrench onto the hexagonal adjusting
nut (Fig.7-6). Rotate the nut – clockwise to raise – counter-
clockwise to lower.
Make 10 complete (360°) turns clockwise.
Make sure you lower BOTH REAR ROLLERS.
Completing the Move
Unfold the rear edge of the cardboard base tray. Grip the
fascia panel and lift the front of the cooker slightly (Fig.7-7).
Carefully push the cooker backwards o the pack base.
Remove the pack base. Position the cooker close to its nal
position, leaving just enough space to get behind it.
DO NOT use the control knobs to manoeuvre the
n
n
cooker.
22
Advertisement
Table of Contents
