Download  Print this page

Assembly/disassembly; Initial Assembly - Pride Go-Chair Owner's Manual

Pride go-chair mobility scooter.
Hide thumbs

Advertisement

I V . A S S E M B L Y / D I S A S S E M B L Y

INITIAL ASSEMBLY

Your Go-Chair may require some assembly either before initial use or after transportation. It may also require
disassembly to make some comfort adjustments. Figure 4 details those parts of the Go-Chair that are designed to
be disassembled and assembled by an end user or by a qualified carer before using the product or making comfort
adjustments. There are two hex keys provided for use with controller installation and adjustment and foot platform
adjustment.
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the travel chair must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert,
resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or
through your authorised Pride Provider.
ARMREST WIDTH
ADJUSTMENT
SEAT HEIGHT
ADJUSTMENT
Figure 4. Go-Chair Assembly View
10
CONTROLLER
POSITION
FOOT PLATFORM DEPTH ADJUSTMENT
www.pridemobility.com
SEAT INSTALLATION
BATTERY REPLACEMENT
Go-Chair

Advertisement

   Also See for Pride Go-Chair

Comments to this Manuals

Symbols: 0
Latest comments: