Disassembly And Assembly - Pride CELEBRITY XL DELUXE Owner's Manual

V I I . D I S A S S E M B L Y
DISASSEMBLY
You can disassemble the scooter into seven pieces:
the seat, the front section, the rear section, the rear
shroud, the basket, and the batteries. See figure 20.
No tools are required to disassemble or assemble your
scooter, but keep in mind that the disassembled
sections of the scooter take up more floor space than
when assembled. Always disassemble or assemble
your scooter on a level, dry surface with sufficient
room for you to work and move around your scooter-
about 2 metres in all directions. Remember that some
scooter components are heavy and you may need
assistance when lifting them.
WARNING! Do not lift beyond your
ph ysical capa bility. Ask for
assistance when necessary while
disassembling or assembling your
scooter.
1. Place the scooter in drive mode by engaging the freewheel lever.
2. Lock the tiller in the straight ahead position by pushing the tiller lock knob in and turning it clockwise 90°. See
figure 21. The front wheel must face forward in order to lock the tiller.
3. Remove the seat by lifting it straight up and off of the scooter. If you encounter resistance when removing the
seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up on the seat.
4. Gently pull the rear shroud up and off of the rear section of the scooter.
LOCKED POSITION
Figure 21. Tiller Lock Knob (Locked)
Celebrity XL Deluxe
A N D
REAR SECTION
REAR SHROUD
Figure 20. The Scooter Disassembled
UNLOCKED POSITION
Figure 21A. Tiller Lock Knob (Unlocked)
www.pridemobility.com
A S S E M B L Y
BATTERIES
FRONT SECTION
BASKET
SEAT
35