Disassembly And Assembly - Pride BAJA BANDIT Owner's Manual

V I . D I S A S S E M B LY A N D A S S E M B LY
DISASSEMBLY
You can disassemble the vehicle into several pieces: the seat, the rear section, the front section, the basket, the
battery pack, and the battery shroud. See fi gure 17. No tools are required to disassemble or assemble your vehicle.
Always disassemble or assemble your vehicle on a level, dry surface with suffi cient room for you to work and move
around—about 5 feet (1.5 meters) in all directions. Remember that some vehicle components are heavy and you may
need assistance when lifting them.
WARNING! Do not lift weight beyond your physical capability. Ask for assistance when necessary
while disassembling or assembling your vehicle.
WARNING! Do not pick up the seat frame or vehicle by the armrests. They are free to pivot, and
you may lose control of the seat if they do so.
IDENTIFICATION KEY
1. Seat
2. Rear Section
3. Front Section
4. Basket
5. Battery Pack
* Indicates
Lifting Points
Figure 17. Disassembled vehicle
DISASSEMBLY PROCEDURES
To disassemble your vehicle:
1. Remove the key from the key switch and then lock the tiller in the straight
ahead position by pushing the tiller lock knob in and turning it clockwise 90°.
See fi gure 18. The front wheel must face forward in order to lock the tiller.
2. Remove the seat by lifting it straight up and off of the vehicle. If you encounter
resistance when removing the seat, disengage the seat rotation lever and
swivel the seat back and forth while lifting up on the seat.
3. Remove the battery pack(s) by lifting the pack straight up and off of the
vehicle.
24
Figure 18. Tiller Lock Knob
®
Mobility BA140
BAJA