Disassembly And Assembly - Pride CELEBRITY X SPORT Owner's Manual

V I I . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
You can disassemble the scooter into seven
pieces: the seat, the front section, the rear
section, the rear shroud, the basket and the
batteries. See figure 21. No tools are required to
disassemble or assemble your scooter, but keep
in mind that the disassembled sections of the
scooter take up more floor space than the
assembled unit. Always
assemble your scooter on a level, dry surface
with sufficient room for you to work and move
around your scooter—about 2 metres (5 feet) in
all directions. Remember that some scooter
components are heavy and you may need
assistance when lifting them.
WARNING! Avoid lifting weight
beyond your physical capability.
Ask for
necessary while disassembling
or assembling your scooter.
1. Place the scooter in drive mode by engaging the freewheel lever.
2. Lock the tiller in the straight ahead position by pushing the tiller lock knob in and turning it clockwise
90°. See figure 22. The front wheel must face forward in order to lock the tiller.
3. Remove the seat by lifting it straight up and off of the scooter. If you encounter resistance when
removing the seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up
on the seat.
LOCKED POSITION
Figure 22. Tiller Lock Knob (Locked)
Celebrity X Sport
disassemble or
assistance when
www.pridemobility.com
REAR SECTION
FRONT SECTION
REAR SHROUD
Figure 21. The Scooter Disassembled
UNLOCKED POSITION
Figure 22A. Tiller Lock Knob (Unlocked)
SEAT
BATTERIES
BASKET
33