Outline And Components; Outline And Parts - SNBC BTP-R180II User Manual

3 Outline and components

3.1 Outline and Parts

1—Power LED
2—Error LED
3—Feed button
4—Tear bar
5—Top cover latch
6—Cutter cover
7—Middle cover
8—Power switch
9— Bottom cover
10—Top cover
11—Top-cover-open sensor
12—Paper sensor
13—Paper guide
14—Printer platen
15—Power connector
16—Cash drawer connector
17—Ethernet interface
18—Serial interface
19—USB interface
Functions of parts:
a- Power Indicator (1)
Indicating power status (ON/OFF).
b- Error indicator (2)
Indicating some error status. Under normal
conditions, ERROR LED is always off. Under
some error conditions (e.g. paper end),
ERROR LED will flash.
c- Feed button (3)
 Feed paper function
Printer will feed paper when the FEED
BUTTON is pressed down under normal
condition. Printer will feed long length paper if keeps pressing down the button.
 Print self-test page
Press down FEED button while turn on the power, the printer will print out self-test page, including
print length, print width, print speed and so on.
 Enter button config function
Press down FEED button while turn on the power, the printer will print out self-test page.
- 6 -
BTP-R180II User's Manual