Outline And Components; Outline And Parts - SNBC BTP-R880NP User Manual

3 Outline and components

3.1 Outline and Parts

1—Power LED
2—Error LED
3—Feed button
4—Tear bar
5—Top cover latch
6—Cutter cover
7—Middle cover
8—Power switch
9—Top cover
10—LOGO
plate
11—Top cover
12—Top-cover-open sensor
13—Paper sensor
14—Paper guide
15—Paper near-end sensor
16—Printer platen
17—Power connector
18—Cash drawer connector
19—USB connector
20—Interface connector
Functions of parts:
a- Power Indicator (1)
Indicating power status (ON/OFF).
b- Error indicator (2)
Indicating some error status. Under normal conditions, ERROR LED is always off. Under some error
conditions (e.g. paper end), ERROR LED will flash.
c- Feed button (3)
Feed paper function
Printer will feed paper when the FEED BUTTON is pressed down under normal condition. Printer will
feed long length paper if keeps pressing down the button.
Print self-test page
Press down FEED button while turn on the power, the printer will print out self-test page, including print
length, print width, print speed and so on.
Enter button config function
Press down FEED button while turn on the power, the printer will print out self-test page.
Printer will stay in pause state after cutting paper (ERROR LED flashes).Then keep pressing FEED
button, the printer will enter button config mode.
- 6 -
BTP-R880NP User's Manual