Turning On; Channel Selection; Important Icons - Angelcare AC403 Owner's Manual

STEP 4 - TURNING ON YOUR MONITOR
1 2
When the Parent Unit is turned
ON and the Nursery Unit is OFF:
• No channel icon will appear
on the screen but the Nursery
Unit icon will blink.
• After 1 minute the Parent Unit
will start to beep. The Parent
Unit will continue to beep
for 5 seconds and then shut
itself off.

CHANNEL SELECTION

1
3
14
1) Press the Parent Unit ON/OFF button
for 2 seconds.
2) Slide ON the Nursery Unit Power
ON/OFF button.
NOTE:
The screen of the Parent Unit will show
the channel of transmission (C1 to C8) and
after 5 seconds the room temperature and
function icons.
The connecting process should be done
within 30 seconds. If this sequence is not
completed within 30 seconds you will need
to switch the units off and start again.
If there is a lost connection
between the 2 units
(refer to troubleshooting):
• The Out-of-range icon
(if activated) will blink
on the screen and the
Parent Unit will beep.
TO SELECT THE CHANNEL:
1) Press and hold the select button
to enter the channel mode.
2) Pressing either the UP or DOWN arrow
will change the channel your monitor
transmits on. (C1 to C8)
3) Press the select button again
to confirm your channel selection.
NOTE :
If the transmission is not clear, or if you hear
interference sounds, you should change
the channel.
2

IMPORTANT ICONS

SOUND TRANSMISSION (VOX)
Nursery Unit:
Appears when options are being
set for the Nusery Unit
Out-of-Range:
Indicates the loss of connection
between the Parent Unit and
Nursery Unit.
Parent Unit:
Appears when options are being
set for the Parent Unit
Temperature Display:
Indicates room temperature
Low Temperature:
Appears when low temperature
alert is ON
High Temperature:
Appears when high temperature
alert is ON
Channel Display:
Indicates selected channel
Alarm mode icons:
Indicates selected alarm mode
Sound alarm
Sound alarm
and vibration
Vibration only
Volume/VOX sensitivity Level:
Indicates the volume and
VOX sensitivity level.
Detection Mode Icons:
Indicates selected dectection mode:
Movement Only
Sound only
'TIC', Sound & Movement
Sound & Movement
'TIC' & Movement
Battery Level icon:
Indicates battery level
Empty
1/2 Full
Full
Charging
15