Ack Character; Nak Character - Datalogic Magellan 3200VSi Product Reference Manual

Interface Related Features
RS-232 Interface Features — cont.

ACK Character

START / END
Sets the ACK character from the set of ASCII characters or any decimal value from 000 to 255. Pad entries of less than three digits
with zeros, as in "005". To configure this feature, scan the "START/END" bar code above to place the unit in Programming Mode,
then the "Set ACK Character," followed by the digits from the Alphanumeric table in
your desired character. Exit programming mode by again scanning the "START/END" bar code above.

NAK Character

START / END
Sets the NAK character from the set of ASCII characters or any decimal value from 000 to 255. Pad entries of less than three digits
with zeros, as in "005". To configure this feature, scan the "START/END" bar code above to place the unit in Programming Mode,
then the "Set NAK Character," followed by the digits from the Alphanumeric table in
your desired character. Exit programming mode by again scanning the "START/END" bar code above.
54
PROGRAMMING bar codes
DEFAULT SETTING FOR THIS FEATURE: 006
PROGRAMMING bar codes
DEFAULT SETTING FOR THIS FEATURE: 021
Appendix C, Alpha-Numeric Pad
Set ACK Character
Appendix C, Alpha-Numeric Pad
Set NAK Character
Magellan
representing
representing
TM 3200VSi