Codabar; Code 128 - Datalogic Magellan 3200VSi Product Reference Manual

Codabar

• Check character must be included in label data.
• Label length including check character and excluding prefix character must meet requirements imposed by
the main scanner's fixed or variable label length control for this symbology type.
• Prefix must be an ASCII character '%'.
• Start stop character sets must meet the matching requirement set forth by the scanner configuration item
Start/Stop Character Match
• Start stop character sets must be of the form ABCD/ABCD and must be included in the label.
• Example: '%s$99.95s' (the lower case 's' at each end of the example is a placeholder for the start stop charac-
ter set).

Code 128

• Prefix must be an ASCII character '#'.
• Label length excluding prefix character must meet requirements imposed by the main scanner's fixed or vari-
able label length control for this symbology type.
• Function characters may be transmitted as a hexadecimal value 8x. Where x correlates to function characters
1 thru 4 as follows:
• x80 = function code 1
• x81 = function code 2
• x82 = function code 3
• x83 = function code 4
• For Code 128 programming labels the format is of the general form '#/82nnnnn/r ' - /82 is hexadecimal 82
and /r is carriage return.
• Example: '#Code_128.Test'.
Product Reference Guide
.
195