Length Control - Datalogic Magellan 3200VSi Product Reference Manual

Code 128 — continued

Length Control

Fixed Length Decoding—
code if the label length matches one of the configurable fixed lengths.
Variable Length Decoding—
bar code if the label length falls in the range of the configurable Length 1 and Length 2 values.
Configuring Fixed Length Decoding:
1. Scan the START bar code.
2. Scan the Fixed Length Decoding bar code.
3. Scan the END bar code.
4. Set Length 1 to the first fixed length by following the
5. Set Length 2 to the second fixed length (or to '00' if there is only one fixed length) by fol-
Configuring Variable Length Decoding:
1. Scan the START bar code.
2. Scan the Variable Length Decoding bar code.
3. Scan the END bar code.
4. Set Length 1 to the first variable length by following the
5. Set Length 2 to the second variable length by following the
START / END
Fixed Length Decoding
Product Reference Guide
When fixed length decoding is enabled, the scanner will decode a bar
When variable length decoding is enabled, the scanner will decode a
below.
gramming Instructions
lowing the
Code 128 Length 1, Length 2 Programming Instructions
below.
gramming Instructions
below.
Programming Instructions
PROGRAMMING bar codes
Code 128 Length 1, Length 2 Pro-
below.
Code 128 Length 1, Length 2 Pro-
Code 128 Length 1, Length 2
Variable Length Decoding
DEFAULT
Code 128
117