Datalogic Magellan 3200VSi Product Reference Manual page 78

Interface Related Features
Keyboard Wedge — cont.
Wedge Quiet Interval
Quiet Interval is the amount of time to look for keyboard activity before the scanner breaks the
keyboard connection in order to transmit data to the host.
START / END
Selectable from 001 to 100 in 10 msec increments. To configure this feature, scan the "START/END" bar code above to place the unit
in Programming Mode, then the
meric table in
Appendix C, Alpha-Numeric Pad
"START/END" bar code above.
70
This feature does not apply to the USB Keyboard
interface.
NOTE
PROGRAMMING bar codes
Set Wedge Quiet Interval
representing your desired length. Exit programming mode by again scanning the
DEFAULT SETTING FOR THIS FEATURE:
010 (100 msec)
bar code followed by the three digits (zero padded) from the Alphanu-
Set Wedge Quiet Interval
Magellan TM 3200VSi