Error Codes; Mount Installation - Datalogic Magellan 3200VSi Product Reference Manual

Getting Started

Error Codes

If an error is detected, the scanner will sound a long low tone (for three seconds) and flash its
LED, indicating a failure. When this occurs, press the Scanner Pushbutton to hear the error
code. If it is configured to do so, the scanner will sound a series of beeps corresponding to the
error code and/or flash its LED simultaneous to the beeps. The table below describes what these
codes mean and what action should be taken for each.
NUMBER OF
LED FLASHES/
BEEPS
1
2
6
10
12
13
14

Mount Installation

Options for mounting the scanner to a wall or countertop include an L-Bracket or stackable
Risers (straight or tilted).
onstrates the use of stackable Risers.
4
ERROR
Configuration
Interface PCB
Main PCB
Button Error
Imager Module
Software ID Failure
Software Fatal Fault
Figure 3
Stackable Risers also require use of the L-Bracket in order to securely seat
the scanner in the topmost riser.
NOTE
CORRECTIVE ACTION
Contact Helpdesk for assistance
shows the scanner being seated in an L-Bracket. dem-
Figure 4
Magellan TM 3200VSi