Length Control - Datalogic Magellan 3200VSi Product Reference Manual

Symbologies
GS1 DataBar Expanded / Expanded Stacked — continued

Length Control

Fixed Length Decoding—
code if the label length matches one of the configurable fixed lengths.
Variable Length Decoding—
bar code if the label length falls in the range of the configurable Length 1 and Length 2 values.
Configuring Fixed Length Decoding:
1. Scan the START/END bar code.
2. Scan the Fixed Length Decoding bar code.
3. Scan the START/END bar code.
4. Set Length 1 to the first fixed length by following the
5. Set Length 2 to the second fixed length (or to '00' if there is only one fixed length) by fol-
Configuring Variable Length Decoding:
1. Scan the START/END bar code.
2. Scan the Variable Length Decoding bar code.
3. Scan the START/END bar code.
4. Set Length 1 to the first variable length by following the
5. Set Length 2 to the second variable length by following the
START / END
Fixed Length Decoding
104
When fixed length decoding is enabled, the scanner will decode a bar
When variable length decoding is enabled, the scanner will decode a
Length 2 Programming Instructions
lowing the
GS1 DataBar Expanded Length 1, Length 2 Programming Instructions
Length 2 Programming Instructions
1, Length 2 Programming Instructions
PROGRAMMING bar codes
GS1 DataBar Expanded Length 1,
below.
GS1 DataBar Expanded Length 1,
below.
below.
Variable Length Decoding
DEFAULT
below.
GS1 DataBar Expanded Length
Magellan TM 3200VSi