Accepting Rs-232 Commands - Datalogic Magellan 3200VSi Product Reference Manual

Accepting RS-232 Commands

The scanner responds to the following RS-232 commands:
COMMAND ASCII
Enable Scanner E
Disable
D
Scanner
Reset Scanner R
Not On File
F
Indication
Beep Good
B
Read Tone
Force Good
!
Read Tone
Bel '
Identification
i
request
Health request h
Status request s
1. Call Tech Support for information.
If one of the above commands is received, the scanner will perform the steps indicated for the command. Host
commands for other interfaces are also available. Contact Tech Support for more details.
Product Reference Guide
HEX COMMENT
0x45
0x44
0x52
0x46 Long series of beeps
0x42 Beeps if Good Read Beep is enabled
0x01 Beeps regardless of beep setting
0x07 Force Good Read Tone
0x69
Returns long response
0x68
Returns long response
0x73
Returns long response
Host Commands
1
1
1
Appendix F
177