Length Control - Datalogic Magellan 3200VSi Product Reference Manual

2D Symbologies
Aztec — cont.

Length Control

Fixed Length Decoding—
code if the label length matches one of the configurable fixed lengths.
Variable Length Decoding—
bar code if the label length falls in the range of the configurable Length 1 and Length 2 values.
Configuring Fixed Length Decoding:
1. Scan the START bar code.
2. Scan the Fixed Length Decoding bar code.
3. Scan the END bar code.
4. Set Length 1 to the first fixed length by following the Length 1, Length 2 Programming
5. Set Length 2 to the second fixed length (or to '0000' if there is only one fixed length) by
Configuring Variable Length Decoding:
1. Scan the START bar code.
2. Scan the Variable Length Decoding bar code.
3. Scan the END bar code.
4. Set Length 1 to the minimum length by following the
5. Set Length 2 to the maximum length by following the
START / END
Fixed Length Decoding
150
When fixed length decoding is enabled, the scanner will decode a bar
When variable length decoding is enabled, the scanner will decode a
Instructions below.
following the
Aztec Length 1, Length 2 Programming Instructions
below.
ming Instructions
below.
ming Instructions
PROGRAMMING bar codes
below.
Aztec Length 1, Length 2 Program-
Aztec Length 1, Length 2 Program-
Variable Length Decoding
DEFAULT
Magellan TM 3200VSi