Length Control - Datalogic Magellan 3200VSi Product Reference Manual

Interleaved 2 of 5 — continued

Length Control

Fixed Length Decoding—
code if the label length matches one of the configurable fixed lengths.
Variable Length Decoding—
bar code if the label length falls in the range of the configurable Length 1 and Length 2 values.
Configuring Fixed Length Decoding:
1. Scan the START bar code.
2. Scan the Fixed Length Decoding bar code.
3. Scan the END bar code.
4. Set Length 1 to the first fixed length by following the
5. Set Length 2 to the second fixed length (or to '00' if there is only one fixed length) by fol-
Configuring Variable Length Decoding:
1. Scan the START bar code.
2. Scan the Variable Length Decoding bar code.
3. Scan the END bar code.
4. Set Length 1 to the first variable length by following the
5. Set Length 2 to the second variable length by following the
START / END
Fixed Length Decoding
Product Reference Guide
When fixed length decoding is enabled, the scanner will decode a bar
When variable length decoding is enabled, the scanner will decode a
below.
Programming Instructions
lowing the
Interleaved 2 of 5 Length 1, Length 2 Programming Instructions
2 Programming Instructions
Length 2 Programming Instructions
PROGRAMMING bar codes
below.
below.
Variable Length Decoding
Interleaved 2 of 5
Interleaved 2 of 5 Length 1, Length 2
below.
Interleaved 2 of 5 Length 1, Length
Interleaved 2 of 5 Length 1,
DEFAULT
121