Custom Mode; Slave Mode; Run Test; Channels Advanced/Basic Mode - SHOWTEC Expression 5000 Product Manual

Custom Mode

For a custom program to run, you have to enter some values first.
For more information, please see Edit menu.

Slave Mode

With this menu you are able to set the device as a slave device.
1) Press Menu, until the display shows: Intro
2) Press Enter and use the Up/Down buttons to go to the Run menu.
3) Press enter to open this menu. Scroll through the menu until the display shows Slave.
4) When you press ENTER, the display will blink once and the device will be in slave mode.

Run Test

With this menu you are able to test the device.
1) Press Menu, until the display shows: Intro
2) Press Enter and use the Up/Down buttons to go to the Run menu.
3) Press enter to open this menu. Scroll through the menu until the display shows TEST.
4) When you press ENTER, the display will blink once and the device will start an internal test.

Channels Advanced/Basic Mode

1) Press Menu, until the display shows: Intro
2) Press Enter and use the Up/Down buttons to go to the Channels menu.
3) Press enter to open this menu. You can choose Basic (9CH) or Advanced (12CH) mode.
Use the Up / Down buttons to select one.
4) Once you have set the desired mode, press the enter button to store your setting.

Display Mode

1) Press Menu, until the display shows: Intro
2) Press Enter and use the Up/Down buttons to go to the Display menu.
3) Press enter to open this menu. You can choose 60_close or Bright mode.
Use the Up / Down buttons to select one.
4) Once you have set the desired mode, press the enter button to store your setting.
17