Dmx Addressing; Reset; Fans; Dmx Active - SHOWTEC Expression 5000 Product Manual

DMX Addressing

With this menu you can set the DMX address.
1) Press Menu, until the display shows: Intro
2) Press Enter and use the Up/Down buttons to go to the Address menu.
3) Press enter to open this menu. You can choose 512 different DMX addresses.
Use the Up / Down buttons to select the required address from 000 - 512.
4) Once you have set the desired DMX address, press the enter button to store your DMX address.

Reset

With this menu you can reset the device.
1) Press Menu, until the display shows: Intro
2) Press Enter and use the Up/Down buttons to go to the Reset menu.
3) Press enter to open this menu. You can choose Yes or No mode.
Use the Up / Down buttons to select one.
4) Once you have set Yes, the device will reset and it will take 15 seconds to reset.

Fans

With this menu you able to control the fan speed of the device.
1) Press Menu, until the display shows: Intro
2) Press Enter and use the Up/Down buttons to go to the Fans menu.
3) Press enter to open this menu. Use the Up/Down buttons to set the desired fan speed.

DMX Active

With this menu you able to control the device by DMX.
1) Press Menu, until the display shows: Intro
2) Press Enter and use the Up/Down buttons to go to the Run menu.
3) Press enter to open this menu. Scroll through the menu until the display shows DMX512.
4) Once you have set DMX control, press the enter button to store your setting. The device will be DMX
Controlled.

Built-in Programs Mode

With this menu you can select 3 different Programs when using the Expression 5000.
1) Press Menu, until the display shows: Intro
2) Press Enter and use the Up/Down buttons to go to the Operation menu.
3) Press enter to open this menu. Scroll through the menu until the display shows Auto1, Auto2, Custom.
You have 3 options to control the device as a stand-alone device.
4) Once you have chosen your desired mode, press the enter button to store your setting. The device will
start the built-in program.

Built-in Programs (Auto_1 + Auto_2)

The device will play its built-in stand-alone programs.
16