Ring; Tone - ATCOM Rainbow1 User Manual

Rainbow1 IP Phone User Manual

4.5.4 Ring

Administer can upload 2 user define ring. The ring file should be wav (8k, 8bit, u-law)
and no larger than 200 KBytes.

4.5.5 Tone

Set the script for each tone.
For example, MWI Dial Tone: 350@-19,440@-19;2(.1/,1/1=2);10(*/0/1+2)
Frequency1, Frequency2; Cadence Section1; Cadence Section2
350@-19: Frequency1 is 350HZ at -19dBm
440@-19: Frequency2 is 440HZ at -19dBm
2(.1/,1/1=2): Cadence Section length is 2s, 0.1s on, 0.1s off, with frequencies 1 and
2
10(*/0/1+2): Cadence Section length is 10s, always on(* means always, 0 means
never), with frequencies 1 and 2.
1. Country stands: Select a country standard tone as default.
2. Dial Tone：The prompting audio to remind user to enter a phone number for
dialing
3. Outside Dial Tone：The prompting audio to remind user to enter an external
phone number (versus an internal extension). This is triggered by a ","
character encountered in the dial plan.
4. Busy Tone：The promoting audio when a 486 RSC is received for an outbound
call.
5. Reorder Tone：The promoting audio when an outbound call failed or after the
remote end hangs up an established call.
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
40