Basic Functions And Operations; Answer The Calls; Make Call - ATCOM Rainbow1 User Manual

Rainbow1 IP Phone User Manual

3. Basic functions and operations

3.1 Answer the calls

When there is an incoming call, phone will remind user with ringing. There are 3 ways
to answer the call
A. Answer by handset
Pick up the handset and talk with the caller. If you want to hang up, just put back the
handset. When you are talking with the handset and want to switch to speaker mode
or headset mode, please press
handset.
B. Answer by speaker
Press key and talk with callers by built-in Micro-phone and Speaker. If you
want to hang up, please press
handset mode by lifting the handset under speaker mode. Press
switch calling or talking into headset mode.
C. Answer by headset
Keep your microphone connected with the RJ9 headset jack, when there is an
incoming call, press
please press
into speaker mode, and lifting the handset switches to handset mode.

3.2 Make Call

A. Use the handset
Pickup the handset and input a phone number. Press soft key "Send" to dial the
number. When you hear the tones of "du~~du~~" and the phone number your dialed
is being displayed on the LCD, the phone at the side of being called should be ringing.
If the called party answers this calling, the call is established and the calling timer is
started immediately.
B. Use the speaker
Press key and input a phone number. Press soft key "Send" to dial the
number. When caller hear the tones of "du~~du~~" and the phone number your
dialed is being displayed on the LCD, the phone at the side of being called should be
ATCOM TECHNOLOGY CO., LIMITED
key or
key again. Switch calling or talking into
key and talk with the caller. If you want to hang up,
key again. Pressing
www.atcom.cn
key, and then put down the
key can change calling or talking
key will
19