Configuration Options; Funkwerk Configuration Interface - Funkwerk TR200aw User Manual

Funkwerk Enterprise Communications GmbH
funkwerk TR200aw/bw
SNMP shell
Log into the SNMP shell as follows:
(1) Enter your user name e.g.
(2) Enter your user password e.g.
Your device logs in with the input prompt, e.g.
are now in the SNMP shell.
To leave the SNMP shell after completing the configuration, enter

5.3 Configuration options

This chapter first offers an overview of the various tools you can use for configuration of
your device.
You can configure your device in the following ways:

• Funkwerk Configuration Interface

• SNMP shell commands
The configuration options available to you depend on the type of connection to your device:
Types of connections and configurations
Type of connection
LAN
Serial connection
Therefore, several types of configuration are available for each type of connection.
Note
To change the device configuration, you must log in with the user name
do not know the password, you cannot make any configuration settings. This applies to
all types of configuration.
5.3.1 Funkwerk Configuration Interface
The Funkwerk Configuration Interface is a web-based graphic user surface that you can
use from any PC with an up-to-date web browser via an HTTP or HTTPS connection.
, and confirm with Return.
, and confirm with Return.
Possible types of configuration
Funkwerk Configuration Interface , shell commands
Shell command
5 Access and Configuration
. The login was successful. You
and press Return.
. If you
87