Vlan - Funkwerk TR200aw User Manual

8 LAN
144
Field
DHCP Hostname
Proxy ARP

8.2 VLAN

By implementing VLAN segmentation in accordance with 802.1Q, you can configure
VLANs on your device. The wireless ports of an access point, in particular, are able to re-
move the VLAN tag of a frame sent to the clients and to tag received frames with a pre-
defined VLAN ID. This functionality makes an access point nothing less than a VLAN-
aware switch with the enhancement of grouping clients into VLAN groups. In general,
VLAN segmenting can be configured with all interfaces.
Funkwerk Enterprise Communications GmbH
Description
virtual interface, e.g.
Some providers use hardware-independent MAC addresses to
allocate their clients IP addresses dynamically. If your provider
has assigned you an MAC address, enter this here.
Only if Address Mode =
Enter the host name requested by the provider. The maximum
length of the entry is 45 characters.
Select whether your device is to respond to ARP requests from
its own LAN on behalf of defined remote terminals.
The function is activated by choosing
The function is not activated by default.
.
.
funkwerk TR200aw/bw