Fig. 48: Routing Nat Nat Interfaces - Funkwerk TR200aw User Manual

10 Routing
168
Routing NAT
Fig. 48: -> ->
For each NAT interface, you can select the options
.
In addition,
for this interface.
Options in the NAT Interfaces menu
Field
NAT Active
Silent Deny
PPTP Passthrough
Funkwerk Enterprise Communications GmbH
NAT Interfaces
displays how many port forwarding rules were configured
Description
Select whether NAT is to be activated for the interface.
The function is not activated by default.
Select whether IP packets are to be silently denied by NAT. If
this function is deactivated, the sender of the denied IP packet
is informed by means of an ICMP or TCP RST message.
The function is not activated by default.
Select whether the setup and operation of several simultan-
eous, outgoing PPTP connections from hosts in the network are
also to be permitted if NAT is activated.
The function is not activated by default.
If PPTP Passthrough is enabled, the device itself cannot be
configured as a tunnel endpoint.
, and
funkwerk TR200aw/bw