Setting Up An Adsl Connection - Funkwerk TR200aw User Manual

2 Initial steps
18

2.4.2 Setting up an ADSL connection

(1) Go to the WAN->ATM->Profiles menu. There is a pre-configured profile that you can
adapt to the requirements.
(2) Choose to check the settings of the existing profile.
(3) Simply check that the values for Virtual Path Identifier (VPI) and Virtual Channel
Identifier (VCI) and the Encapsulation agree with the data that you received from
your ISP. If you did not receive this data, keep the default values. The value
for Type corresponds to a PPPoE connection.
(4) Change the description of the profile as required, e.g.
(5) Once you have made the changes, confirm them with OK.
(6) Now go to the Internet+Dialup ->PPPoE menu and click on New.
(7) Enter a Description for the connection, e.g.
(8) For PPPoE Ethernet Interface, select
(9) As User Name and Password, enter the access data provided by your ISP. Make
sure to use any special formatting of the access data (e.g. for Deutsche Telekom, see
Gathering data on page 14).
(10) If you have an interface with a flatrate, check Always Active. This means the ADSL
connection is always on and is re-established each time it is terminated.
(11) Check Default Route and Create NAT Policy .
(12) Leave the default settings for all other values.
(13) Confirm with OK. You return to the overview of PPPoE connections.
(14) If the connection is active, you will see the following symbol in the Status column:
However, this does not automatically have to be the case, therefore you should check
the connection as described in
(15) Save the configuration by clicking on the Save Configuration button above the menu
navigation.
2.4.2.1 Testing the configuration
Once you have completed the configuration of your system, you can test the connection in
your LAN and to the Internet.
Carry out the following steps to test your system:
(1) Test the connection to your system. In the Start menu, click on Run and enter
followed by a space and then the IP address of your system (e.g.
A window appears with the response
(2) Test Internet access by entering
Funkwerk Enterprise Communications GmbH
.
Testing the configuration
www.funkwerk-ec.com
.
on page 18.
.
in the Internet browser. You
funkwerk TR200aw/bw
.
).