Installation; Connections; Fig. 3: Back Of Tr200Aw/Bw - Funkwerk TR200aw User Manual

2 Initial steps
12

2.3 Installation

TR200aw/bw makes many connection types possible. You configure your system using the
Funkwerk Configuration Interface . The way to obtain the basic configuration is explained
below step-by-step. Detailed knowledge of networks is not necessary. A detailed online
help system gives you extra support.
Caution
Please read the safety precautions carefully before installing and starting up your sys-
tem. These are supplied with the device.

2.3.1 Connections

All connections are located on the back of the device.
TR200aw/bw
Fig. 3: Back of
1 ADSL Grey socket
2 4/3/2/1 Yellow socket 10/100 Base-T Ethernet interface; the serial interface
3 FXS Black sockets internal interface for analogue terminals (telephone or
4 FXO/S0 Red socket
5 S0 Black socket
6 Reset -
7 WLAN -
8 Power -
Funkwerk Enterprise Communications GmbH
ADSL interface (annex A or B)
is led through Ethernet 1, connection using the serial
cable supplied
fax)
External interface for analogue or digital telephone
lines (POTS or ISDN)
Internal interface for digital terminals
Reset button
RSMA connection and on/off switch for wireless mod-
ule
Socket for desktop mains unit
funkwerk TR200aw/bw