Real Time Jitter Control; Controlled Interfaces - Funkwerk TR200aw User Manual

11 WAN
228
Field

11.3 Real Time Jitter Control

When telephoning over the Internet, voice data packets normally have the highest priority.
Nevertheless, if the upstream bandwidth is low, noticeable delays in speach transmission
can occur when other packets are routed at the same time.
The real time jitter control function solves this problem. So that the "line" is not blocked for
too long for the voice data packets, the size of the other packets can be reduced, if re-
quired, during a telephone call.

11.3.1 Controlled Interfaces

In the WAN -> Real Time Jitter Control ->Controlled Interfaces menu, a list of all inter-
faces is shown for which the real time jitter control has been configured.
11.3.1.1 New
Click o the New button to set up port forwarding for other interfaces.
Funkwerk Enterprise Communications GmbH
Description
• : OAM CC requests are sent and answered after CC ne-
gotiation (CC activation negotiation).
• : Depending on the setting in the Direc-
tion field, OAM CC requests are either sent and/or responded
to. There is no CC negotiation.
• : The function is not enabled.
Also select whether the test cells of the OAM CC are to be sent
or received.
Possible settings:
• (default value): CC data is both received and generated.
• : CC data is received.
• : CC data is generated.
• : The function is not enabled.
funkwerk TR200aw/bw