Tpm Configuration - Kontron KTH81/mITX User Manual

KTD-N0882-I

TPM Configuration

Current TPM State
TPM Action
Omit Boot Measurements
F1 Help ↑↓
Esc Exit ←→
Function Selection
No Change
Enable
Disable
Activate
Deactivate
Clear
Enable and Activate
Disable and Deactivate
Set Owner Install, with State=True
TPM Action Set Owner Install, with State=False
Enable, Activate, and Set Owner Install, with State=True
Disable, Deactivate, and Set Owner Install, with State=False
Clear, Enable, and Activate
Require PP for provisioning
Do not require PP for provisioning
Require PP for clear
Do not require PP for clear
Enable, Activate, and Clear
Enable, Activate, Clear, Enable, and Activate
Disabled
TPM Support
Enabled
Page 96
Phoenix SecureCore Technology Setup
Security
TPM Configuration
[Enabled and Activate]
[No Change]
[Disabled]
Select Item +/-
Select Menu Enter
KTQ87/KTH81 Users Guide
Enact TPM Action. Note: Most
TPM actions require TPM to be
Enabled to take effect.
Change Values F9
Select Sub-Menu F10
►
BIOS - Security
Item Specific Help
Setup Defaults
Save and Exit
Description
Enact TPM Action. Note:
Most TPM actions require
TPM to be Enabled to take
effect.
Enabling this option
causes the system to omit
recording boot device
attempts in PCR[4].