Xdp_Pch (Debug Port For Chipset) (Xdp_Pch) - Kontron KTH81/mITX User Manual

KTD-N0882-I

7.17 XDP_PCH (Debug Port for Chipset) (XDP_PCH)

The XDP_PCH (Intel Debug Port for Chipset) connector is not mounted and not supported. XDP_PCH
connector layout (pads) is located on the backside of PCB (below J35 connector on mITX version) and is
prepared for the Samtec BSH-030-01-F-D-A-TR.
Note Pull U/D Ioh/Iol Type
Page 55
Signal PIN
PWR GND 1 2
NC 3 4
NC 5 6
PWR GND 7 8
XDP_0 9 10
XDP_1 11 12
PWR GND 13 14
XDP_2 15 16
XDP_3 17 18
PWR GND 19 20
NC 21 22
NC 23 24
PWR GND 25 26
XDP_4 27 28
XDP_5 29 30
PWR GND 31 32
XDP_6 33 34
XDP_7 35 36
PWR GND 37 38
PWRGD 39 40
HOOK1 41 42
PWR 3.3V 43 44
NC 45 46
NC 47 48
PWR GND 49 50
SMB_DAT 51 52
SMB_CLK 53 54
NC 55 56
JTAG_TCK 57 58
PWR GND 59 60
KTQ87/KTH81 Users Guide
Signal Type Ioh/Iol Pull U/D Note
GND PWR
EC_WRST#
2x4_PWR_DETECT
GND PWR
SATA0GP
SATA1GP
GND PWR
GP36
GP37
GND PWR
NC
NC
GND PWR
SATA4GP
GP49
GND PWR
GPIO18
SMI_N
GND PWR
JTAG_VREF
NC
3.3V PWR
RESET#
HOOK7
GND PWR
JTAG_TDO
JTAG_RST
JTAG_TDI
JTAG_TMS
GND PWR
Internal Connectors